JOHN DEERE AT190775 892E SLEWING RING

Basic Dynamic Radial Load Rating C:133000 N; Grease Speed Rating n1:3600 rpm; Fillet Radius ra:2.50 mm; D:180.0000 mm; B:41.00 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Static Radial Load Rating Co:96500 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Sp

d2 ≈:340 mm; Calculation factor e:0.23; da min.:307 mm; Da max.:445 mm; Reference speed:1200 r/min; G1:26 mm; b:16.7 mm; Fatigue load limit Pu:265 kN; K:9 mm; B1:145 mm;

Dynamic (Cr):3 mm; d:120 mm; Grease:1080 kN; D:200 mm; Oil:114.390 kN; Static (Cor):5.5 mm; rs (min):2 mm; B:80 mm; with cylindrical bore:950 min-1; with tapered bore:1 300 min-1;

Calculation factor kr:0.025; r0 max.:0.6 mm; Da max.:69.2 mm; Reference speed:20000 r/min; D3:71.83 mm; D2 ≈:67.8 mm; Calculation factor f0:15; ba min.:2.2 mm; Limiting speed:12000 r/min; ra max.:1 mm;

D:110 mm; α:124 °; Coefficient of friction µ min.:0.08; B:50 mm; Tolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; h:91.5 mm; B1:8 mm; Permissible sliding velocity v max.:0.5 m/s; D1:120 mm;

R2:30.163 mm; Cap bolt recommended tightening torque:298.3 N·m; PG:1/4 NPT; Bearing:22220 EK; ba:44.45 mm; P150°:58.7 kN; Labyrinth ring:2 x LOR 100; Appropriate attachment bolt size G:0.75 in; Pa:13.8 kN; S:4.763 mm;

Mass inner ring:0.036 kg; F:28 mm; d:22 mm; r, r1,2 min.:0.3 mm; B:20.5 mm;

d:40.000 mm; Oil Speed Rating n2:12000 rpm; D:68.0000 mm; Grease Speed Rating n1:9500 rpm; Basic Static Radial Load Rating Co:14600 N; Fillet Radius rb:0.30 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:19500 N; B:15.00 mm;

Hydraulic nut:HMV 16 E; B:18 mm; d:80 mm; d1:69.85 mm; Mass adapter sleeve assembly:0.98 kg; G:M 80x2; B1:59 mm; Lock nut:KMFE 16; d3:105 mm;

Fillet Radius ra:1.00 mm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:28600 N; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:20400 N; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; B:23.80 mm; Oil Speed Rating n2:9500 rpm;

l3 min.:30 mm; l5 ≈:16 mm; Basic static load rating C0:57 kN; C1 max.:13.5 mm; G:M 20x1.5; Basic dynamic load rating C:44 kN; r1 min.:0.3 mm; Mass rod end:0.34 kg; l4 max.:106 mm; dk:29 mm;

D:650 mm; d2 ≈:454 mm; B:170 mm; Basic dynamic load rating C:4430 kN; Fatigue load limit Pu:440 kN; K:12 mm; d:360 mm; Limiting speed:850 r/min; Calculation factor e:0.26; Mass bearing:255 kg;

d:150 mm; G:149.555 mm; d1:131.762 mm; Threads per inch:12; Sleeve:S 30x5.3/16; B4:28.575 mm; Lock washer:W 30; d3 max.:195.402 mm; Lock nut:AN 30; B:24.867 mm;

End cover:ECY 209; Thread grub screw G2:1/4-28 UNF; N:16 mm; d:45 mm; Recommended diameter for attachment bolts, mm G:14 mm; R1:24.5 mm; B1:56.3 mm; Fatigue load limit Pu:0.915 kN; B4:6.75 mm; Db1:102 mm;

Thrust factor K:1.76; Comparative radial load rating CF:1460 kN; D1 ≈:573 mm; Comparative axial load rating CFa:236 kN; r3,4 min.:1.5 mm; Design variant/feature:TQI; r1,2 min.:6 mm; D:595 mm; d1 ≈:510 mm; B:388 mm;